the QZ Grab Bucket Overhead Crane delivers unmatched efficiency. This specialized crane integrates a robust single or double girder bridge with a motorized grab bucket, automating heavy, labor-intensive tasks while maximizing throughput and minimizing spillage. Designed for demanding industrial environments such as power plants, foundries, ports, and bulk storage yards, the QZ crane transforms bulk material logistics.
Automated Bulk Handling: The motorized clamshell grab bucket opens, closes, grabs, lifts, transports, and releases materials without manual intervention, drastically reducing labor costs and physical strain.
High Operational Efficiency: Significantly faster cycle times compared to manual methods or excavators, leading to higher throughput in loading bays, stockpiles, or processing lines.
Reduced Spillage & Dust: Precision-engineered grabs provide a secure enclosure during lifting and travel, minimizing material loss and airborne dust – critical for environmental compliance and material savings.
Versatility Across Materials: Interchangeable grab buckets (clamshell, orange peel, timber, scrap) allow handling of diverse materials – from fine grains to large scrap chunks.
Optimized Space Utilization: Overhead operation clears floor space for vehicles, personnel, and other equipment, enhancing safety and workflow in congested areas.
Table 1: QZ Grab Bucket Crane Core Specifications
| Parameter | Typical Range | Notes |
|---|---|---|
| Capacity | 5 tons – 50+ tons | Capacity refers to the safe working load of the crane + grab + material. Actual grab payload is lower. |
| Grab Bucket Volume | 0.5m³ – 15m³+ | Selected based on material density and desired payload per cycle. |
| Span (S) | 10m – 35m+ | Customizable to fit warehouse, stockyard, or vessel dimensions. |
| Lifting Height (H) | 6m – 30m+ | Determined by silo depth, stockpile height, or vessel hold depth. |
| Work Duty Class | A6 – A7 (Heavy to Very Heavy) | Designed for frequent, high-intensity cycles in harsh environments. |
| Control System | Cabin or Radio Remote | Essential for operator visibility and safety in dusty/vibrant conditions. |
| Power Supply | 3P, 380V, 50Hz (or local std.) | Heavy-duty motors for hoist, grab, and travel drives. |
Table 2: Grab Bucket Types & Applications
| Grab Type | Design | Ideal Materials | Key Feature |
|---|---|---|---|
| Double-Rope Clamshell (QZ Standard) | Two drums (hold/close ropes) | Coal, Sand, Gravel, Grain, Fertilizer | Precise opening/closing control, good seal. |
| Motorized Clamshell (4-Rope) | Independent motors on grab | Heavy materials (Ore, Rock), High-density bulk | Higher grab force, less rope wear. |
| Orange Peel Grab | Multiple hinged “petals” | Scrap Metal, Large Rocks, Demolition Debris | Handles irregular shapes, penetrates piles. |
| Timber Grab | Long tines with claws | Logs, Pulpwood, Large Bundles | Secures long, cylindrical loads. |
| Electro-Hydraulic Grab | Hydraulic actuation | Very heavy/dense materials, Deep bins | Highest closing force, robust for tough jobs. |
Power Plants: Unloading coal from barges/railcars, transferring coal to bunkers or stockpiles, handling ash.
Steel Mills & Foundries: Charging scrap metal into furnaces, handling pig iron, transporting slag, moving sand/refractories.
Ports & Terminals: Loading/unloading bulk carriers (ships), transferring cargo between vessels, stockyard management.
Grain Silos & Processing: Unloading trucks/railcars, filling silos, transferring grain between bins or to processing lines.
Aggregate & Mining: Handling gravel, sand, crushed stone, ore; loading trucks or railcars.
Waste Recycling: Sorting and moving bulk recyclables (scrap, plastics, waste wood).
Cement Plants: Handling raw materials (limestone, clay), clinker, gypsum, fly ash.
Heavy-Duty Construction: Reinforced girders, end carriages, and trolleys withstand A6/A7 duty cycles and impact loads from grabbing dense materials.
Dedicated Grab Hoist & Mechanism: Separate hoisting motor(s) and grab opening/closing drive(s) ensure independent, reliable control. Anti-sway systems stabilize the load during travel.
Dust & Debris Protection: IP55/IP65 rated or totally enclosed motors and electrical gear protect against ingress of dust and moisture. Cable reels or enclosed conductor bars supply power reliably.
Advanced Safety Systems:
Overload Limiter: Prevents crane operation beyond safe capacity.
Double Braking System: On hoist and grab mechanisms for failsafe holding.
Limit Switches: Hoist upper/lower limits, grab open/close limits.
Emergency Stop: Instantly cuts power to all motions.
Anti-Collision Systems: (For multiple cranes on same runway).
Crane Weighing System: (Optional) Displays real-time load weight.
Operator Ergonomics: Comfortable, climate-controlled cabins or intuitive radio remotes with clear visibility and controls reduce fatigue.
Material Characteristics: Bulk density is CRITICAL (kg/m³). This directly determines the required grab volume for your target payload per cycle. Also consider abrasiveness, lump size, and flowability.
Required Throughput: Calculate tons/hour needed. This dictates cycle time requirements, influencing crane speed specs and grab size.
Operating Environment: Indoors/outdoors? Extreme temperatures? Presence of dust, moisture, or corrosive elements? Dictates protection levels (IP rating, special paints).
Grab Type & Mechanism: Choose based on material (see Table 2). Double-rope is standard; motorized/electro-hydraulic offer higher force for tough applications.
Control & Visibility: Radio remote is often preferred for flexibility and safety in bulk handling. Cabins require good sightlines.
Supporting Structure: Ensure the building runway system or outdoor gantry supports can handle the dynamic loads of a grab crane (significantly higher than hook cranes).
Strict Inspection Regime: Daily pre-op checks (brakes, ropes, grab mechanism, limit switches). Frequent inspections of wire ropes, sheaves, and structural components. Annual comprehensive inspections per safety standards (e.g., ISO, FEM, CMAA, GB).
Grab Maintenance: Regular inspection of jaws, hinges, cables/hydraulics, and wear plates. Timely replacement of worn parts is crucial for performance and safety.
Lubrication Schedule: Strict adherence to manufacturer’s lubrication points and intervals for all moving parts.
Operator Training: Comprehensive training on safe grab operation (proper grabbing technique, avoiding swinging loads), emergency procedures, and pre-operation checks.
Spare Parts: Maintain critical spare parts (especially for the grab mechanism) to minimize downtime.
The QZ Grab Bucket Overhead Crane is an indispensable asset for any industry moving significant volumes of loose bulk materials. By automating the grab, lift, transport, and release process, it delivers unparalleled efficiency, significant labor savings, reduced material loss, and enhanced workplace safety compared to manual methods or less specialized equipment. Its robust A6/A7 design ensures reliability in the most demanding environments, from dusty coal terminals to vibrating foundry floors. When selecting a QZ crane, careful consideration of material properties, throughput requirements, and operational environment is key to configuring an optimal, high-productivity system that maximizes your return on investment.
